Lightwave Bulb Compatibility

Lightwave LED Bulb Compatibility

All light bulbs used with Lightwave Smart Dimmers must be dimmable. Traditional incadescent bulbs are all dimmable, but you need to make sure LED and CFL bulbs are dimmable. Look for the dimmable logo as in the image on the packagaing.

LED Bulb Compatibility

In the rapid development of LED lighting technology there are no recognised uniform standards for LED lamps / bulbs. Currently this means the performance and technology used in LED lights varies enormously making universal compatibility with dimmer switches difficult to achieve.

Class leading Lightwave Smart Dimmers have been engineered to automatically calibrate to individual lamps (light bulbs) to reduce issues in this area.

Due to this calibration ability the vast majority of LED bulbs perform very well from installation, some LED bulbs can require manual calibration to work correctly. A minority of LED bulbs may need additional lamps to increase the total circuit load to work. However after all this, a few LED lamps can function poorly.

To help you, we have pre-tested LED bulbs to check to see if they work with the Lightwave dimmers, which is in the LED Bulb Compatibility Chart below. The chart is updated and added to regularly but is not an exhaustive list due to the number LED lamps available.


Lightwave LED Bulb Compatibility Chart

GU10 Bulb Fittings


Manafacturer Model Colour Wattage Min no. of lamps Max no. lamps
Phillips Master Xpert colour 2700K warm white 5.5W 2 15
Phillips Classic LEDspot MV 2700K warm white 5.5W 1 15
Phillips Master LEDspot value 4000K cool white 7W 1 15
ASDA 6 pack dimmable LED 2700K warm white 4.9W 2 15
LAP Screwfix brand 2700K warm white 4.6W 2 19
Sainsbury's Home 2700K warm white 5.2W 1 15


E27 Bulb Fittings


Manafacturer Model Colour Wattage Min no. of lamps Max no. lamps
Phillips Core pro LED spot R63 2700K warm white 4.5W 2 10
Phillips Master LEDspot PAR38 2700K warm white 13W 1 10
Tesco LED Classic 2700K warm white 15W 1 9
Sainsbury's Home 2700K warm white 8.5W 1 15


E14 Bulb Fittings


Manafacturer Model Colour Wattage Min no. of lamps Max no. lamps
LAP Screwfix brand 2700K warm white 5.9W 1 10
Phillips LED spot R50 2700K warm white 4.3W 1 10


E22 Bulb Fittings


Manafacturer Model Colour Wattage Min no. of lamps Max no. lamps
Phillips Master LEDbulb 2200-2700K 11W 2 8
Tesco LED Classic 2700K warm white 15W 1 9
All LED AGU1055D/60 4000K cool white 9W 1 8
Sainsburys Home 2700K warm white 8.5W 1 9


Some Notes

If you cannot get hold of the LED lamps above, then a good rule of thumb is to buy branded LED lamps. From experience do not buy the cheapest LED bulbs as they are more likely to have issues (they are not on the chart!).

Lighwave do not recommend exceeding 60W of LED load per gang (switch) for Lightwave Smart Dimmers, unless exceptions are ahown on the chart above.

Damage to smart dimmers may occur if the LED lamps used are not not dimmable (always check the LED lamp packaging / specifications) or incompatible (Philips Hue). Lightwave strongly recommend adhering to the compatibility chart.



The compatibility chart is for guidance purposes only, highlighting the limited testing completed at Lightwave.

Lighwave and Sockets & Switches make every effort to ensure the information provided about the lamps on this chart is accurate. Due to fluctuations in electrical supply and individual installations Lightwave do not guarantee this chart will work in all situations and will accept no liability against lamps purchased.

© 2021 Copyright Sockets And Switches
Sockets & Switches, Unit 4 Althorpe Enterprise Hub, Althorpe Street, Leamington Spa, Warwickshire, CV31 2GB  |  enquiries@socketsandswitches.com