Hand Forged Hammered Copper Toggle (Dolly) Switch

Toggle or Dolly Switches operate in the same way as a standard light switch. The difference is that the modern rocker is replaced by a more traditional toggle style switch. Many people prefer these as they are more representative of a period style switch or that they look more industrial or minimalist in contemporary environments.

Light Switches are generally available to switch 1 way and/or 2 way circuits. All of our Light Switches are 2 way versions and the beauty of this is that they can be used on both 1 way and 2 way circuits thus eliminating the need to buy both types. A 2 way circuit refers to a lighting point that can be switched from 2 different places i.e. Hall and Landing, where you might have a switch at the bottom of the stairs and a further switch at the top of the stairs that both control the same lighting point.

If you should have more than 2 switching positions you will require one of the switches to be a intermediate switch.

Our light switches are available from a single switch (One Gang) up to as many as 6 switches (Six Gang). The word “gang” refers to the rocker switch – for example if you require a triple light switch it would be 3 Gang.

Our light switches have a load rating of either 10amp or 20amp and the terminals will accept up to 3 x 1.5mm Twin & Earth Cables.

We recommend 16mm deep wall boxes for mounting our switches or 25mm deep wall boxes for shallow or flat plate Switches.

If you require any advice or assistance please call our sales team on 01926 289289.