Seamless Square Polished Stainless Steel Intermediate Toggle (Dolly) Switch

Toggle or Dolly Switches operate in the same way as a standard light switch. The difference is that the modern rocker is replaced by a more traditional toggle style switch. Many people prefer these as they are more representative of a period style switch or that they look more industrial or minimalist in contemporary environments.

Intermediate Switches are also known as 3 way Switches. Intermediate Switches are typically used on a circuit that requires you to switch a lighting point from more than 2 positions ie On the Stairs and landings in a 3 story house where you would have a switch on the ground floor then also switches on the 2 upper floors that all control the same lighting point.

You would then require 2 x 2 way switches and 1 x intermediate switch to control this circuit.

Intermediate switches are generally only available as a single switch (One Gang) however we also sell multiple combinations of Intermediates and 2 way switches that you can find on our shopping menu where available.

Our light switches have a load rating of either 10amp or 20amp and the 4 terminals found on the back of the intermediate switch will accept up to

3 x 1.5mm Twin & Earth Cables.

We recommend 16mm deep wall boxes for mounting our switches or 25mm deep wall boxes for shallow or flat plate Switches.

If you require any advice or assistance please call our sales team on 01926 289289.