Inc. Vat
Ex. Vat
Switched Plug Socket
A.K.A. the common 3 pin Plug Socket
Inc. Vat
Ex. Vat
Plug Socket with USB Charging
Plug Socket with additional USB charging ports - you don't have to remember your USB charger!
Double Socket with 2 USB chargers - 1 USB for Tablet | Phone Charging and 1 Phone Charging Socket - Black Trim
More Info & Images
Model: S79868
£83.00
£99.60
Double Socket with 2 USB chargers - 1 USB for Tablet | Phone Charging and 1 Phone Charging Socket - White Trim
More Info & Images
Model: S79866
£83.00
£99.60
Inc. Vat
Ex. Vat
Round Pin Unswitched Socket (For Lighting)
Plug Sockets usually used for lights - table lamps, floor lamps etc
Inc. Vat
Ex. Vat
Light Switch
Rocker Light Switches - other light switches available - Toggles, Push and Dimmers
Inc. Vat
Ex. Vat
Intermediate Light Switch
The third Rocker Light Switch in a lighting circuit e.g. on a set of stairs with a light switch at the bottom, a light switch at the top and the intermediate switch is on the landing inbetween - your electrican will tell you if you need one
Inc. Vat
Ex. Vat
Intermediate Switch and Light Switch Combination
Intermediate and Light Rocker Switches on a single plate - your electrican will tell you if you need one
2 Gang Combination : 1 x 20amp Intermediate Switch + 1 x 20amp 2 Way Switch
More Info & Images
Model: S79862
£89.40
£107.28
3 Gang Combination : 1 x 20amp Intermediate Switch + 2 x 20amp 2 Way Switch
More Info & Images
Model: S79863
£108.20
£129.84
Inc. Vat
Ex. Vat
Toggle | Dolly Switch
A Light Switch with a toggle switch instead of the standard rocker. Usually used in period properties
Inc. Vat
Ex. Vat
Intermediate Toggle Switch
The third Toggle Light Switch in a lighting circuit e.g. on a set of stairs with a light switch at the bottom, a light switch at the top and the intermediate switch is on the landing inbetween - your electrican will tell you if you need one
Inc. Vat
Ex. Vat
Intermediate Toggle Switch and Toggle Switch Combination
Intermediate and light toggle switches on a single plate - your electrican will tell you if you need this type of plate
2 Gang Toggle Combination : 1 x 20 Amp Intermediate Toggle Switch + 1 x 20 Amp 2 Way Toggle Switch
More Info & Images
Model: S79864
£115.20
£138.24
3 Gang Toggle Combination : 1 x 20 Amp Intermediate Toggle Switch + 2 x 20 Amp 2 Way Toggle Switch
More Info & Images
Model: S79865
£142.20
£170.64
Inc. Vat
Ex. Vat
LED Dimmer
Dimmer used for LED lighting - typically dims up to 100W of lighting - ask electrican for advice if unsure
1 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
More Info & Images
Model: S79805
£82.00
£98.40
2 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
More Info & Images
Model: S79806
£128.00
£153.60
3 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
More Info & Images
Model: S79807
£183.00
£219.60
4 Gang 100W 2 Way LED (Trailing Edge) Dimmer (Min Load 1W, Max Load 100W)
More Info & Images
Model: S79808
£220.00
£264.00
Inc. Vat
Ex. Vat
Intelligent Dimmer
Dimmer used in lighting circuits for non LED lighting - ask electrican for advice if unsure. Senses load type and dims accordingly.These dimmers are 2 Way. For LED lighting use a LED Dimmer (see below).
Inc. Vat
Ex. Vat
Button Dimmer
Dimmer with a button push switch to dim / brighten lights. Requires additional module to work
Inc. Vat
Ex. Vat
Dimmer and Light Switch Combination
Dimmers and Light Switches on one plate for ease of use
2 Gang Combination : 1 x 400w 2 Way Dimmer Switch + 1 x 20amp 2 Way Switch
More Info & Images
Model: S79859
£112.00
£134.40
3 Gang Combination : 1 x 400w 2 Way Dimmer Switch + 2 x 20amp 2 Way Switch
More Info & Images
Model: S79860
£153.00
£183.60
3 Gang Combination : 2 x 400w 2 Way Dimmer Switch + 1 x 20amp 2 Way Switch
More Info & Images
Model: S79861
£166.00
£199.20
Inc. Vat
Ex. Vat
Switched Fused Spur
Has a fuse holder in to protect the electrical item in the circuit with a switch to turn the item on or off
13 Amp Switched Fused Spur with Neon and Flex Outlet : Black Trim
More Info & Images
Model: S79812
£73.00
£87.60
13 Amp Switched Fused Spur with Neon and Flex Outlet : White Trim
More Info & Images
Model: S79814
£73.00
£87.60
Inc. Vat
Ex. Vat
Unswitched Fused Spur
Has a fuse holder in to protect the electrical item in the circuit. Does not have a switch - for switched circuits see Switched Fused Spur
Inc. Vat
Ex. Vat
Flex Outlet Plate
For single cables to come out of the wall. For multiple cables use Brush Plate
Inc. Vat
Ex. Vat
20 Amp Switch
Most 20 Amp Switches are Double Pole. This means that the switch connects / disconnects both sides of the circuit when operated for safety. Used mainly for appliances. Some 20A switches are single pole which will be shown in the description next to the switch.
Inc. Vat
Ex. Vat
Cooker (45 Amp Double Pole) Switch
A 45 Amp Double Pole Switch used for high power loads - cookers, showers etc. Disconnects both sides of the circuit for additional safety
Inc. Vat
Ex. Vat
Cooker Control (45 Amp Double Pole Switch and 13 Amp Socket)
A 45 Amp Double Pole Switch used for high power loads with a 13 amp socket. Disconnects both sides of the circuit for additional safety
45 Amp Double Pole Switch with 13A Switched Socket : Black Trim
More Info & Images
Model: S79823
£94.00
£112.80
45 Amp Double Pole Switch with 13A Switched Socket : White Trim
More Info & Images
Model: S79822
£94.00
£112.80
Inc. Vat
Ex. Vat
Fan Isolator
Isolates fans used in bathrooms and other damp areas to remove the moist air
Inc. Vat
Ex. Vat
Shaver Socket
Dual voltage socket for shavers, electric toothbrushes etc
Inc. Vat
Ex. Vat
Telephone Master Socket
The Master Phone Socket (first one when the telephone wire comes into the building) for the phone line - only one required for each phone line
Inc. Vat
Ex. Vat
Telephone Extension Socket
For all the other the Phone Sockets in the house; need a Master Phone Socket for the extension to extend from
Inc. Vat
Ex. Vat
RJ45 Network Socket
Socket for RJ45 plug - used for computer networks - Can be Cat5, Cat5e or Cat6 varieties - Cat 5 lower speed, Cat6 highest speed
Inc. Vat
Ex. Vat
TV Socket
Co-axial aerial socket for TV and FM reception
Inc. Vat
Ex. Vat
TV and SKY Socket
A TV aerial socket and satellite (F) Connector on the same plate for ease of use.
Inc. Vat
Ex. Vat
TV, FM and SKY Socket
A TV aerial socket, radio FM socket and satellite (F) Connector all on the same plate for ease of installation / use.
TV Aerial Socket, Satellite F Connector (SKY) and FM Aerial Socket combined on one plate : Black Trim
More Info & Images
Model: S79843
£59.00
£70.80
TV Aerial Socket, Satellite F Connector (SKY) and FM Aerial Socket combined on one plate : White Trim
More Info & Images
Model: S79842
£59.00
£70.80
Inc. Vat
Ex. Vat
Satellite Socket (F Connector)
Socket for connecting satellite cable.
Inc. Vat
Ex. Vat
Speaker Socket
Sockets to connect speaker cable to, so the speaker cable can run within the wall
Inc. Vat
Ex. Vat
Blank Plate
Plate to cover up unused (or not yet used) back boxes
Advanced Switches
This section has switches that do more than switch on and off and can be used for more advanced functions without involving the smart home automation systems.
Inc. Vat
Ex. Vat
PIR Switch
Great for saving energy or for hygiene. Detects you from a distance and switches the lights on, then switches the lights off when you leave the room
Inc. Vat
Ex. Vat
Pulse | Retractive Switch
Retractive Switches can be used for a multitude of functions from the straightforward like a door bell, to more advanced functionality like remote dimmers and time lag switches. The switch is pressed to activate the required function which can either deactivate instantly (for example a door bell), after a set time (time lag switch) or pressed again (dimmers). If you have any questions on how retractive switches can be used please contact us.
Remote Dimming Module for Push Button Dimmers / Momentary Switches : 10 - 250W.
Important - 1 Remote Dimming Module required per lighting circuit
More info
£53.29
£63.95
Time Lag Module for Push Button Switch : Important - 1 module required per button \ circuit for non Retrofit Time Lag Switches
More info
£43.28
£51.94
Remote Dimming Module for Push Button Dimmers / Momentary Switches : 10 - 250W.
Important - 1 Remote Dimming Module required per lighting circuit
More info
£53.29
£63.95
Time Lag Module for Push Button Switch : Important - 1 module required per button \ circuit for non Retrofit Time Lag Switches
More info
£43.28
£51.94
Modular Plates
Make your own socket and switch plates to fit your needs. Just choose the plate size and then add the modules up the maximum for that plate. For example a 2 Gang module plate can have two single size (thin) modules and a 4 Gang plate can have four single size (thin) modules.
A double module (the size of two singles) is easy to spot as it has a square shape - if you choose a double module you obviously can have fewer single modules e.g. a 4 Gang plate can have one double and two single modules (instead of the normal four singles).
One last thing, choose your module colour to match the plate/trim, so a module plate with a white trim usually has white modules in it.
To order modules for your modular plate, please visit the Choose Your Modules
Inc. Vat
Ex. Vat
Modular Plate
Plate used as a base for modular systems - various modular sizes to match your needs
Other Items & Accessories
Extra long screws to help install your sockets and switches
Extra Long Screws Length 75mm (Steel | Chrome finish only) - Pair
More Info & Images
Model: S62249
£1.24
£1.49
Long Screws Length 50mm (to match finish Supplied) - Pair
More Info & Images
Model: S31345
£2.71
£3.25
Inc. Vat
Ex. Vat
Surface Mount Boxes (Wall Boxes)
These boxes attach to wall and then the socket or switch is attached. Used when normal back boxes embedded in the wall cannot be used
Satin Nickel - Double (2 Gang) Metal Clad Surface Mount Box with PVC inner pattress - 35mm Depth
More Info & Images
Model: S56731
£20.83
£25.00
Satin Nickel - Double Solid Metal Surface Mount Wall Box - (86mm x 146mm) 35mm Depth
More Info & Images
Model: S62465
£57.00
£68.40
Satin Nickel - Double Solid Metal Surface Mount Wall Box - 35mm Depth. (94mm x 154mm) For Large Plate Sockets and Switches
More Info & Images
Model: S62489
£50.60
£60.72
Satin Nickel - Single (1 Gang) Metal Clad Surface Mount Box with PVC inner pattress - 35mm Depth
More Info & Images
Model: S56732
£17.50
£21.00
Satin Nickel - Single Solid Metal Surface Mount Wall Box - (86mm x 86mm)35mm Depth
More Info & Images
Model: S62464
£52.00
£62.40
Satin Nickel - Single Solid Metal Surface Mount Wall Box - 35mm Depth. (94mm x 94mm) For Large Plate Sockets and Switches
More Info & Images
Model: S62488
£46.20
£55.44
Inc. Vat
Ex. Vat
Wall Box
The box that goes into the wall to accomodate the socket or switch on the front and wires to connect them
Double Cavity Wall Box : 35mm Deep - For mounting into dryline or plasterboard cavity walls
More Info & Images
Model: S58389
£1.67
£2.00
Single Cavity Wall Box : 35mm Deep - For mounting into dryline or plasterboard cavity walls
More Info & Images
Model: S58388
£0.83
£1.00
Special - 6 Gang Modular Plate Back Box : 215mm x 75mm x 51mm (W x H x D)
More Info & Images
Model: S76513
£20.00
£24.00
Special - 8 Gang Modular Plate Back Box : 255mm x 75mm x 47mm (W x H x D)
More Info & Images
Model: S76514
£20.00
£24.00
5 stars 3
reviews
